The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

fuel problem 200 1980

recently i spent many weeks getting a 1980 240 wagon non diesel to re start and run after many years of sitting idle.

i learned a great deal about this fuel system in the process.

i suggest:

you remove the intank sending unit and inspect the pump for failure and while you're in there make REAL sure the insides of the tank are clean and not rusty or sludge filled. if the tank is less than pristine replace it with a good used one.

the intank pump or more likely the rubber line which connects it to the sending unit output pipe has rotted away leaving the main pump to do all the work.

the real weak spot in this years fuel system is imo the fuel pressure regulator. once this gets clogged or obstructed the pressure to the injectors is reduced causing all manner of running issues.

because these injectors are NOT electrical they must have spec pressure to produce a good pattern.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.