The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Speedo wire plug @ diff 900 1991

posted by  Steve on  Sat Aug 13 06:20 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 07:16 CST 2014
[RELATED]

I just fixed this with a new wiring harness to the sensor. It was surprisingly cheap at Borton Volvo. Just disconnect the connector at the sealed box inside the left rear trunk well (remove the carpet for better access), feed the new wiring through the trunk hole and secure the rubber grommet, then connect to the sensor. Make sure you route it through the right spots to keep it from chaffing. Took about an hour. To open the sealed box (sealed to prevent odometer tampering), just cut off the little hinges on the side with a knife. Re-secure with zip ties.
--
See the 700/900 "FAQ" at the menu bar top screen left side.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.