The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

no start - injectors not opening 200 1986

I found that the injectors are not opening. A noid light flashes (bright) on all 4 ports (done 1 at a time) but the injectors do not reliably open. I get 1 out of 10 reliable starts. When it starts, it runs well. It seems the current is too low to open the injectors.

This is an LH 2.2, others have noted that the LH2.4 may have a 'weak' transistor that can cause this, but not a 2.2. The FI wire harness was removed and found to be 100% good. Grounds have been soldered and cleaned plus new FI relay. Fuel regulator and pressure are good, as is strong spark.

I'm to the point of buying a used ECU, but this model ECU appears rarely to fail - especially intermittently.

If anyone has any suggestions, I'd appreciate it since I'd love to get this car out of the driveway.

Thanks,

TM






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.