The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Couple questions before sealing up the engine block 120-130

Just want to triple-check to insure this is set up correctly before I start sealing up the engine with all it's gaskets and covers. I know this probably seems OCD to some who have been working on these cars for decades, but this is my first engine rebuild of any type, and I've got a lot of time and dollars tied up in it. I'd hate to make a small but critical oversight at the 11th hour.

First off is the timing relationships for the distributor drive gear. With #1 piston at TDC and timing marks aligned, does this drive gear orientation look correct?




Secondly, how critical is the positioning of the timing gear squirter? The black marks indicates the current orifice location. Being a tapered thread it's difficult to get it simultaneously tight and aligned with the mesh point of the gears.










USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.