The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Speedometer interchange 200 1990

I have a '90 240 that keeps throwing the 3-1-1 code which is no speed signal to the ECU. Also, the cruise control doesn't work. Both the speed signal to the ECU and the cruise control come from the speedometer. The speedometer and odometer both work fine. Earlier this year, my sons were re-installing the instrument cluster and they didn't know where the red/white tach wire goes to (I don't have a tach). Anyway, they hooked it to the same connector as the yellow wire that goes to the cruise control unit.

Assuming that they must have fried something on the circuit board in the speedometer, I pulled a instrument cluster from the junkyard. However, the one I pulled was from a '91. Apparently the circuit boards were changed in '91.

The '91 speedometer doesn't work when installed in my '90. Does anyone know if the sending unit in the differential was changed as well? Also, does anyone have any ideas on how I could bench test the speedometer?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.