The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

not getting fuel to injecters 200 1981

posted by  81242DLB21FCA on  Sun Jan 8 06:01 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 22:26 CST 2014
[RELATED]

Is there spark at the plugs when cranking?

If there is spark then you can check the air meter plate movement.
Go to k-jet.org and down load the kjet injection manual so you can see how the air meter plate works.

Be careful removing the rubber billows as it can split easily. It might be better to get to the bottom of the plate by removing the air duct from the air cleaner. Then use a piece of rubber hose or the handle end of a screwdriver to gently lift up the plate. It should move easily and smoothly.

The cold start injector must also work to start a cold engine. You can test it by removing it from the manifold, place it in a can and see if it sprays while cranking. The volume will be much less than the main injectors.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.