The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Stromberg hot start problem 140-160

posted by  JohnH on  Sat Jan 28 10:45 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 6 00:29 CST 2014
[RELATED]

I'm leaning towards something inside the carbs needing fixing. I've checked the timing (10BTDC at idle going to about 35BTDC at I'm guessing 2500rpm)), dwell (52degs - a little low, but probably not critical) and brand new BP6HS gapped to 28thou. I haven't checked the valve clearances. They might be tight because I couldn't hear any tappet sounds.
I'm away from the car for the next 6 weeks or so and will check all the above again, do the valves and finally pull the carbs to bits when I get back.
Thanks for all the help.
--
JohnH, Sydney, Australia






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.