The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

My experience with an ECU Reset switch for using LPG & Petrol 700

Hi,

This image shows the ECU reset box that I've installed on top of my steering column. It contains a "push to break" momentary off switch to reset Port 14 on the LH-Jetronic ECU. It also contains two LEDs which show the status of the cruise control system. I've included a resistor, activated by the small SP switch, which dims them for night driving.

The ECU reset is needed as the engine requires a "fresh start" when switching from LPG to Petrol. Also, when idling for a long time using LPG, the Lambda Sensor light comes on. This is due to the preset values for the sensor not matching the exhaust from the engine when running on LPG. Pressing the reset switch for 5 seconds resets this light.

I've included a 10k resistor in the circuit between the ECU reset switch and port 14 so that , when open , the voltage goes to ground. By the way, the current is only 2.3 mA.







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.