The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

crank position/speed sensor 200 1990

posted by  1990Volvo240 on  Mon Feb 20 14:15 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 3 13:18 CST 2014
[RELATED]

Hi,

The crank position sensor's connector is at the back of the firewall, probably near the valve cover. The black cable from it runs down in back of the engine and the sensor itself is on top of the bell housing. Get a flashlight and shine it in down behind the valve cover towards the bell housing and you will see it connected down there with one 10mm bolt.

Check the archives and the 700/900 FAQ for details about the sensor.

Near the connector there is either a yellow or white stripe around the cable insulation. What color is the stripe? Also, if any of the black insulation is cracked with the inner wires showing, replace the sensor.

Travis






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.