The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

why would the IAC hose going to the intake air hose be connected to a blocked port? 700 1991

I got a 2-2-1 code on my 700 after experiencing some rough running while the car was cold.

I checked for intake air leaks and found the hose from the IAC valve to the air intake hose disconnected. So I thought I was done until I realized that the port it should be plugged into was a blocked port! It wouldn't allow air to get to the IAC valve since the manufacturer made the hose blocked.

So how does the IAC valve get air into it if it is attached to no air?

Should I drill a hole through the plastic of the intake hose so the IAC valve gets what I would assume that it needs?

confused,

Jack

--
Bad Blue - '86 245 with 303,000 mi. (now for parts), Good Green 1990 245 with 178,000 mi., Blacky - '91 740 wagon with 180,000 mi., Mean Green - '94 850 with 222,000






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.