The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wing window locks 140-160 1972

Maybe I'm the odd one out.
I've had good luck with rear view mirror adhesive on the vent windows.

Keep in mind that you are attempting to glue two non-porus virtually flat surfaces. That is a challenge for any adhesive.

Both surfaces must be spotless. After you've cleaned them, clean them again. I've wiped them down with mineral spirits followed by brake cleaner followed by alcohol. Let them dry thoroughly.
Follow the directions on the adhesive. It doesn't take a real lot to get good adhesion. Remember, you're not filling any pores with adhesive. That's why you don't need much. My experience is that too much will not hold. Don't clamp it too hard because you'll squeeze all the adhesive out.

Be patient. It will work eventually. It may take you a few tries - I know it did for me.

If you give up, IPD used to sell aftermarket latches that did not need any glue. They would just grasp around the edge of the glass.

Good luck.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.