The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Possibilities with a 1-1-3 fault code? 200 1991

posted by  Herb Goltz on  Fri Apr 13 07:36 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:23 CST 2014
[RELATED]

Sounds like progress! The extra voltage you're seeing on the O2 sensor has to be coming from somewhere (the sensor itself cannot produce those kinds of voltage values). Plug everything in again, and when it is running badly, disconnect the heater circuit only to the O2 sensor (the two wire connector). If the car runs well and you are measuring between 0.15-0.85VDC on the sensor, you know it is bleed-over from the heater circuit into the sensor line (if you are using a digital multimeter you may have to watch it for a while to see the voltage peaks and troughs because the meter doesn't update very quickly). Replace the sensor and you should be good to go...

Good luck!





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.