The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ANSWER Wiper arm removal? 1800 1971

First put a couple of small pieces of tape to mark where the wipers sit when they are off - you probably want to put them back in the same place.

Remove the nut completely and put some penetrating oil around the threads. Gently tap the end of the arm in a couple of directions, Letting it sit for a while may help.

What is under there is a cylinder that has splines all around it, The wiper socket is splined also. If it has been on for a long time, the extra surface area can make it stick pretty good.

You will need to pull, wiggle, pry, and whatever you can come up with in order to pull the socket off the cylinder.

You do not want to damage the mechanism.
--
'96 855R,'64 PV544 driver, '67 P1800 basket case, '95 855, '95 854, the first three are mine, heh, heh, 485,000 miles put on 9 bricks

This post has been marked as an answer to the original question.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.