The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B23 engine, rough idle after replacing flame trap 200 1983

Hi all,
Did a 700 mile round trip two weeks ago, and was spewing oil out the fill cap. Determined it was a clogged flame trap (metal flame trap and nearly closed solid). Replaced the flame trap with a plastic one from a b230 engine, hooked up the hoses and drove home without issue. Had to lengthen the hose from the top of the flame trap with a second hose. No hose clamps at the time, so I seated one hose deep inside the other, and secured them together with several zipties.

Now the car has a very low idle when cold, and will stumble until I get up to temp. and I'm hearing a sound like a jet engine between 35-50 mph.

I'll replace the zipties with a proper clamp or better yet, a proper single hose setup and see if that takes care of the jet engine sound, but what would cause a lower, and rougher idle after fixing a flame trap issue?

Thanks,
Bruce
83 244 N/A, auto






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.