The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1995 960 cylinders 5 and 6 not firing 900 1995

My '95 960 is not firing on cylinders 5 and 6. I have replaced the coils, injectors, spark plugs, and wires. I get spark from the coils, and there is power to the injectors. But the car runs real rough, and when I pull off the coils from those cylinders, there is no change. The same is true when I remove the injector connectors. When I do the same to each of the other cylinders, the engine gets even rougher, so I know that 5 and 6 are the problem cylinders.

The head gasket went bad, and so I tried a sealer just to see if I could keep the car running while I look for a replacement engine. I now get 150 lbs compression in 5 and 6 and almost 180 in the others. The pressure holds in all 6. There seems to be no leaking between coolant and lubrication.

I am going to switch the power stages but wonder if that will make a difference. Any ideas will be a big help. Thanks.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.