The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Clutch Thinking... 120-130

Hello Patrick:

Well this is frustrating. I ordered the very kit you highlighted in your post above, received it from Parts Geek, removed the slave and took the beast apart.

Then I opened the package and looked at the valve. It looked kind of small. I put a caliper on it and indeed, it measured 3/4", not 13/16" which is what I need. I have the invoice in front of me - it is indeed TRW W0133-1636075.

Concerned about all this, I decided to not pry the old valve off. Do you know if mounting the valve on the stem of the piston should increase the diameter by 1/16"? That sounds like too much to hope for, right?

I put everything back together so I could drive the beast. Shame on me for not opening the package and checking the diameter before I went through all the trouble.

I want to return this for either a refund or the right part, but I want to make sure I check my math first.

Thanks again for your help everyone.

Cheers,

Pooch






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.