The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Bleeding Brakes 200

Problem:

I chose this sunny day to bleed my brakes (I bought the car used a month ago and have been getting around to checking everything--the brake fluid looked bad). I borrowed a vacuum bleeder from a friend and it worked well--or so I thought. I finished up all the bleeder valves (three on each front and then one in the back), and when I turned the car on and pushed down the brake, the brake was squishy. I never let the reservoir go completely empty--or at least not at the back grommet, though I may have let the front part of the reservoir go empty. Wondering if there is any way to isolate where there might be air, or if there is something else I did wrong. I have a 91 volvo 240 with ABS. I went in order LR, RR, RF, LF.

This may be a stupid question but if I did need to drive it tomorrow, would it be a bad idea to drive it with the brakes squishy?

Thanks for the help.

Jimmy






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.