The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How does a fuel sending unit work? 700 1991

1991 740 non turbo , regina . This is why I am asking. Many years ago I replaced my instrument cluster and since then my fuel gauge reads backwards. The replacement was from another year. I recently removed the entire fuel pump/sending unit for a pump repair. My sending unit is not compressible like others. I can hear something sliding up and down in the tubed chamber and I gather this must be a kind of "float" for the fuel quantity. There are two wires to the sending unit . The entire assembly , pump and sending unit ,has four wires and two are for the fuel pump , two for the sending unit.Could I desolder the wires from the sending unit and reverse them so the gas gauge in the cluster read true? Thoughts?
: Or perhaps reverse the wires at the connector located behind the carpet near the radio antenna in trunk.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.