The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

re: 87 245 auto - welding floor pan/outside set up 200 1987

posted by  Onkel Udo II on  Tue Oct 16 23:21 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:50 CST 2014
[RELATED]

"Q3. Is this good enough for this type of welding? HFT 90 Amp Flux Wire Welder Chicago Electric Welding Systems - item#68887"

Try some welding on sheet metal with it. Anything from 18 ga to 1/16". I find 14" a lot easier with a splattermatic than thinner material. You will have to play with temp and speed for a while until you get is right...then figure out how to do the same thing upside down.

Best improvement we ever made to to our no-name welder was good wire from Hobart. A skilled welder (not me) built a whole 8'x16' trailer with it but the same guy screwed up firewall fill panel on our LeMons race car...burned 1/4" holes all around the sides...had to make a new patch a 1/2" bigger all the way around. A little better dialing in and he did the second one right.

Remember to skip around with sheet metal. A tack here, at tack there...not spending much time in any one place or you will quickly warp the panel.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.