The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Pax Window stuck down and hurricane coming 900 1992

1992 945T Passenger window will power to the down position but not up. Naturally this happens two days before the hurricane is scheduled to arrive.


I have removed the switch and it checks OK per the Mike Ponte switch schematics. Probably don't have time to trace the down power wire in the door or after it disappears into the body for a break.

Here is my question: With the switch removed can I put +/-12 VDC on two of the wires at the door connector and just power the window up for now? If so which two?

I think that to run the window up the switch connects its terminal 4 (red/yellow wire) to terminal 1 (blue wire) and terminal 5 (red/grey wire) to terminal 2 (red wire). So if I put +12 VDC on 1 (blue) and its - on 2 (red) then I think it will run the window up right?

Will probably wait for daylight to try this.

Brian Mee
92 945T






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.