The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replace Injectors 200 1989

Has to be one of the all time simplest engines for injector replacement. There are three 10mm bolts on the fuel rail to remove. Unplug the 4 injector connectors and, starting at the front, gently pull the rail and injectors as a unit out of the manifold. I've seen folks actually bend the fuel rail doing this but has not been an issue for me. It's best to replace the o-rings top and bottom to assure no leaks but often this step is overlooked. Depends on whether you want a car-b-q or not. The injectors are held into the rail with c clips. A small screwdriver gets them lose in no time. It's fairly difficult to mix up the injector connector wires but doesn't matter as the Volvo has a batch fire setup. When replacing the rail and retaining bolts, be sure to re-install the ground wires previously held on to the injector rail by the bolts or the car won't run.
--
When Volvos are outlawed, only outlaws will have Volvos!!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.