The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

92 740 blown trans, what will fit? 700

Honestly, any AW70/71 should fit. You may have to re-use your bell housing and flex plate depending on the model/year you get. That means any 240 from 1981'ish on and any 7-series with a shifter that has the electronic OD button on the side and any 940...with the last couple of years of the 9-series being the best.

Your description of the failure is suspect. Do you have coolant in the tranny fluid or tranny fluid in your coolant? If not, have you tried adding ATF letting it run a bit and then doing a tranny flush per the FAQ's? I have only heard of a couple of failures do to anything other than coolant contamination.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.