The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Continuing valve noise(?) saga 700 1988

If the rope in the combustion chamber can stop the piston on the upstroke sufficiently to loosen the pulley bolt, it would also stop the piston on the upstroke when you cranked it. Stopping the piston enough to impair the piston rod from turning on the crank means something in the stroke train has to give. Take your pick - bearing, bent rod, bent skirt. It's possible that the top of the piston was compromised.

Suggestion - drain the oil, see if any metal parts show up.

Once the rope escapes the chamber, most likely into the exhaust valve, you're still left with a wrinkled part.

The thud/thunk you're describing is consistent with a rod knocking. Any of those wrinkled parts would lose linear strength, and it's just a matter of time before it breaks.

A bent valve would not seat properly and would likely be evident in performance, especially an exhaust valve - significant decrease in compression.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.