The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Cold Idle problem after engine rebuild 200 1990

Finished a Head rebuild, on my 1990 240, changed seals, etc. and on restart engine has a very rough sometimes stall in morning, cold rough idle. I adjusted the idle screw up to give to my son to start driving, and that overdid it, and now that it has warmed up, it has a very fast idle.

Head was milled to max ... cut down 0.020".

I am wondering if I did something I should not have, causing poor cold idle, like using teflon tape on the temperature sensors? or something.

I checked timing, and it is dead on, very smooth, I can tell I have more power.
Also changed transmission seals, kick down cable and filled with synthetic Dex VI.

I did not change any sensors.

Any suggestions...what to troubleshoot... start with temp sensor resistance? O2 sensor?
Thanks - Old Guy






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.