The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1975 164 dies when put into drive 140-160 1975

posted by  ssholland on  Thu Feb 28 18:17 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 9 18:31 CST 2013
[RELATED]

Hello, I recently adjusted my valves. Thought I did it correctly. It starts fine, idles fine, but when I put it in gear, it will die. I did not have this problem before. There was a lot of rattling prior to adjusting the valves. It was quite loud. Now if purrs except when I put it in gear. When I get it going and drive it it is sweet at higher speeds. Everything is ok, until I let off the gas and brake to a stop or corner, it then idles down and makes me worried about it dying. My ideas on this are the injectors need replacing, vacuum leak, or maybe the valves were set incorrectly. I'd appreciate any and all ideas.

Question, which line is it to the fuel pressure regulator is the vacuum line, the top or the one from the bottom?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.