The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Hood Seal 700 1990

posted by  spasske on  Mon Apr 22 09:16 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:11 CST 2014
[RELATED]

The hood seal on my wagon is loose and has let water into the distributor cap. The plastic Tees that connect it to holes in the fire wall appear to have pulled through the seal.

Has any just pulled it off and reattached it with plastic pan head screws? I was thinking of drilling a small hole in the seal and using automtive plastic screws to reattach it. I would also add a bit of silicone to seal the drilled hole as well.

I measure the holes with a drill bit to be a hair larger than 1/4 inch.
--
Paul NW Indiana '89 744 Turbo 160K/ '90 745 turbo 140K






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.