The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Serious water pump leak. 200 1990

So recently my water pump begin to make some very serious noise and today I attempted to change it out to a new one. When putting the new one on the block, I put a thin layer of gasket sealer on the pump itself, then I put the gasket which came with the pump, and put that on the prepared and smooth surface of the block.

After I put everything back together I was surprised to see that the pump was leaking even before I started the car up. I didn't have time to fix it so I intend to do that tomorrow.

If I'm not mistaken there are four bolts which hold on the pump to the block, And one which holds the pipe to the pump and goes into the block. Does that sound right? There seems to be an extra hole in the new pump but I wasn't sure if I had lost a bolt.

I'm not sure if I can buy a gasket by itself. But when I redo the job tomorrow I would like to wind up with no leaks at all.

Thanks for all your help.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.