The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Serious water pump leak. 200 1990

"If I'm not mistaken there are four bolts which hold on the pump to the block, And one which holds the pipe to the pump and goes into the block. Does that sound right? There seems to be an extra hole in the new pump but I wasn't sure if I had lost a bolt."
Without going out to one of my 240's or digging out a spare pump to refresh my memory--I'd say you are mistaken. There should be 5 bolts (some models have two studs and three bolts) holding the pump to the block. There's one at the very bottom--center. I use that hole to pry the pump up to squish the rubber top seal and then add that bolt last. I was confused by "And one which holds the pipe to the pump and goes into the block." The bolt and nut that hold the water pipe are independent of the WP securing bolts. -- Dave






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.