The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Which bleeder valve to bleed when replacing this one brake hose? 200

I need to replace one of my front brake hoses immediately in order to pass inspection. No time or money to do all of them at this time.

Scorro mentioned using the "gravity" method, and I'd like to try that. Can someone say how long that should take for just one bleeder?

To start, I've used a stick to press the brake pedal down half-way or so, and put a sheet of polywrap between the reservoir cap and reservoir in order to block it from drawing air and allowing brake fluid to flow too much when I remove the brake hose.

It's the rightmost brake hose looking at the caliper, and is the top going into the rear of the caliper.

I don't know which bleeder corresponds to that hose. There are three- one in the middle of each caliper, then one on top of the rear caliper.

Which bleeder should I bleed after replacing this hose?

Thanks,
Keith
1991 240 Sedan








USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.