The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

replacement Harmonic balancer wobbling- alignment tricks? 200 1990

Hi, All. The old harmonic balancer on the "never make a job easy on me" 245 Wagon was wobbling badly at idle. I found what looked like a low mile replacement at teh PnP with no rubber cracking. The PO had replaced the t belt recently and when I pulled off the old balancer I could see where the nib from the gear had made an impression about 40" off of the balancers keyway. Not wanting to repeat this mistake, I used some paint to mark the keyway on the pulley part and the lower timing cover. The nib was much smaller than on my 92 which I was able to line up perfectly when I did the t belt. this was a pretty small nib and also had what looked like a thrust washer further reducing the protrusion of the nib. Any tricks to correctly aligning? as it looks like I missed the alignment because she's wobbling exactly as she was with the old harmonic balancer. Ticks me off when I screw something like this up!
Thanks, Greg






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.