The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Help in removing the MCC unit from dash? 900 1994

posted by  rstarkie on  Wed Jun 19 11:33 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:14 CST 2014
[RELATED]

1994 944t 231K

The AC compressor is not getting 12v from the MCC unit in the dash. I have encountered this in a 1991 745t and it was a bad solder relay joint on the control board. It just required resoldering and everything was cool again.

After pulling off the faceplate I removed the four corner screws on the unit but the lower corners can't move out because of the metal tabs that are circled in the image below.

Does the radio have to come out to get at additional fastners that secure the metal tabs? There is a Kenwood unit in the car and I do not have the "tools" the original owner would have received that would unlock the unit.

Thanks, Randy

photo 773_zps8ea02ecd.jpg






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.