The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No Spark - Problem Analysis 200

these seem like good next steps. If you have a soldering iron you can re-flow the solder on the fuel pump relay right away and see if that gets you going.

Do you have spark at the main coil wire? what is the age / condition of the cap and rotor? Plugs?

if you're looking for something else to do you can clean all of the engine bay grounding points. There are some on the fenders and some on the intake manifold; a long shot but good to do. have you checked / cleaned all of the ceramic fuses in the passenger compartment?

what brand of power stage did you install? There are power stages going for under $20 on ebay right now. Unlikely that its dead in box but you never know.

keep at it!

this may be helpful if you want to start check continuity of wiring.
http://www.volvowiringdiagrams.com/volvo/240%20Wiring%20Diagrams/Volvo%20240%201991.pdf



--
'90 245 290k, '93 945 296k






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.