The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Please Help! Flushing ATF in my 940, no fluid pumping out in middle of operation!!!

Hi Everyone

Flushing my tranny as recommended in the FAQ. Drained 2.5 quarts of fluid from pan, replaced plug, refilled same amount. Connected hose to nipple at top of radiator and turned car on. All was going well when I was in Park--nasty fluid was coming out of radiator, a quart or two at a time. Replaced as this was happening.

THEN I followed the editors note in the FAQ, and put the car into Drive. Maybe another 1/2 to 1 quart came out of the radiator nipple, then stopped flowing. I put the tranny back into Park, turned off engine, and made sure that I had put an equivalent amount of new Mobil 1 as the old funky stuff that had come out.

Turned engine back on for maybe 30 seconds, and still no fluid is coming out at the radiator!!! My car has its guts all spilling out, and I am stuck not knowing what to do, afraid to keep running the engine....

Your input would be so very welcome.

Thank You!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.