The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

EZK Ignition Module 900 1994

posted by  HillBilly on  Mon Dec 16 08:57 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 16 08:26 CST 2014
[RELATED]

Remove the knee bolster over the drivers knees.
There are (3) Torx Screws on the front edge and (2) trim clips on the rear edge.
I't pretty easy to get off and to replace.

There is a guide pin on the bolster that slides into a hole in the dash, so you have to pull it straight out after removing the screws and trim clips.
That guide pin makes it a whole lot easier to re-install because it aligns all of the screw holes back up.

The Ignition Module is just to the right of the steering column inside the dash. (looking towards front of the car.).
It has a black plastic housing and the wiring harness plugs in from the bottom.

Hope this helps
steve





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.