The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Shift lock is Trashed - need a new assembly - my Wagon has been Repaired! 200 1993

Bought a used shift assembly off of eBay. Instead of replacing my whole shifter, I removed the gray plastic gear selector from the purchased assembly and installed on my shifter in place orf the black shiftlock piece. It was a bit fiddly to do since there is such little access to remove and reinstall the two screws that attach the selector. Also had to remove a very small pin from the foot at the bottom of the shifter shaft, put the gray gear selector in place and then reinstall foot and pin before putting in the two screws. Not easy but my car is proof that you can swap a gear selector from an older automatic and put it on a 93 in place of the brittle shiftlock selector.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.