The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

volvo seats and vents 1990

In practice, the seats are not interchangeable, especially on the later cars like your 90 with the seat belts mounted next to the center console, not in the center console. The seat belt receivers are such a tight fit in there as is, that the consoles actually become deformed and some break. If you swap the seats such that the seat back rake adjustment knobs are in that space next to the console, the access and fit are just unworkable. But yes, the seats will bolt in on either side.

That said, the upper and lower halves of the seats are interchangeable, and the adjuster is part of the hinge assembly, not the seat frame. If you need to swap out bottoms, you can unbolt the entire seat top with the hinges from the bottom frame. Keep in mind that the driver's side has the quick-release seat height adjustment mechanism and the passenger does not. You can swap that part too.

DS






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.