The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Compression Question 700

Compression test gauges should have a check valve that keeps the pressure in them so you can read the gauge after cranking. The valve in the tester you have isn't working probably.
The readings on the first three cylinders are good. So the gauge is fine for accuracy I think. If the wet and dry on four show 80 then you have a burned valve more than likely. It's not the guides except that worn guides allow the valve face and seat to not match up. Exhaust guides can wear really badly on these engines.
Pull the cam cover to check for a broken spring. You'd have about 1/8 inch lash or more on the bucket. And lots of noise.
Depends on how much oil you put in the cylinder as well. If not enough then a busted ring won't get sealed. Still could be a busted ring plowing a groove in the cylinder.
So you either drive it to a bigger failure, or pull the head to see. If it's a valve fix it. If it's rings, find another engine. Pistons are expensive.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.