The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

horns not working 900

If you have done any work inside the drivers side of the dashboard recently, remove the access panel on the top of the steering column and confirm that the little connector for the wire that runs up to the horns has not been tugged loose (or loose-ish) from the spade lug on the slip ring assembly.

I failed state inspection 2 years ago because of that connection--installing the instrument cluster a week before had snagged the horn wire and tugged it just enough that it was loose on the spade resulting in no horn 95% of the time.

and if you go chasing other faults, here are the relevant pages (90 & 91) from the green book to a 1993 940:




I hope they are legible enough for your purposes...

FYI, connector C2 is buried WAY THE F*%# up in the left hand side of the dash. Unless you show a lack of continuity between the connector at the horn and the connector at the slip ring, don't go chasing that connector.

john

--
1989 245 245K / 1993 945 131K






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.