The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear Fog Lamps 700 1990

Found a lot of information today. One socket was melted. I used a solder scraper to remove the excess plastic inside the socket hole so that a lamp could be inserted. I fixed the metal bus as it had popped loose of its melted plastic retainers. I used superglue. That is suboptimal. I will look for something better.

I plan on wiring these to my brake lamp busses.

I upped the bulb output as suggested in the FAQ. (Now using 3497 bulbs, which are 28 watts rather than 21 like the 1156 lamps that are spec-ed.) The brake busses (not including the 3rd lamp in the rear window) carry the two 21 watt bulbs. If I wire in the 3497 bulbs that will be 4x28 amps. I imagine I need to change my fuse. Is this the case? Or just leave it alone?

Also, what gauge of wire should I solder to the busses for 28 amp bulbs?
--
Mama always told me to eschew obfuscation...






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.