The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1993 240 front whee bearing rubber seal 200

posted by  740gt on  Sat Sep 13 12:29 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 29 12:51 CST 2014
[RELATED]

There is a stamp steel washer cap with a lip. In addition there is a rubber gasket. Both of these fit onto the back of spindle prior to the hub installation. Two questions.
1. Does the steel cap lip face towards the bearing or the back plate?
2. The rubber gasket has two edges one is flat then there is a gap then the other edge is larger and conical if viewed from a cut view. Which direction does this rubber gasket face?

Currently I have the steel cup lip facing the back plate.

I first placed the rubber gasket with conical side facing the back plate. I stretched it over the spindle taper the flat edge of the spindle then put the steel cup on then the hub.

A diagram would be helpful.

Thanks






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.