The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Nut Splitter

I need to Dremel through the bolt itself, flush with the control arm bracket. The Dremel is 90ยบ off from that. Plus, there is that lip, so that nothing can get up flush with the bracket wall and still cut through the nut and bolt.

A Dremel pointed back there, running lengthwise from front to rear of the vehicle (the only way it will fit) will have the wheel cutting from side to side. That is why I will probably get the right angle attachment, which will allow me to get to the area with the tool perpendicular to the axle and the head also perpendicular to the axle.

You cannot get the Dremel in there where it is running parallel to the axle shaft, only perpendicular. I need the actual cutoff wheel to be running in the same plane as the vehicle's wheels.

The problem is the lip on the bracket.

I am not understanding you, here. Sorry...
--
Mama always told me to eschew obfuscation...






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.