The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine swap 444-544

posted by  derek uk on  Tue Dec 2 06:52 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:33 CST 2014
[RELATED]

Fitting the smaller starter motor as fitted to the 240 to 940 Volvos will give you more room around the MC area. This starter runs a bit quicker too and if needed, much easier to find recon than the B18/20 ones. Needs different bolts to do the swap and an easy job if fitted before you drop the engine in. At least prove the fit before fitting an engine less starter, which you might want to do for access to the MC and clutch mechanisms. Bell housing holes need to be opened out a fraction to take the 12mm bolts needed for these starters. Minimum length 100mm and using a socket/Allen headed bolt for the top one can be useful.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.