The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

245 rear window washer hose routing 200 1991

When I bought my 240 nothing about the rear washer worked. The pump was bad, the switch was bad, the wiring was bad...you get the idea.

I've finally got it all in order, only to find that it seems like the hose between the pump and the nozzle is clogged. I disconnected it from the pump, and wasn't able to blow through it. For the hell of it I disconnected the nozzle and put a vacuum pump on the end. With both ends open I can put into vacuum, about 30InHg. So that's not right. I figure I'll just replace the whole line, but aside from where I can see it under the hood, and where it comes out the back of the car in the jam for the rear hatch, I have no idea where it goes.

Does it run up under the headliner? Or in the rocker? Somewhere else?

Thanks as always for the help!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.