The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

not getting gas to cylinders. Won't start 200 1985

Recently purchased 244DL was running perfectly, then began to feel lag in acceleration up to 30mph when first driven in morning, then ran fine after driving about half a mile. After a couple of days it wouldn't crank. Embarrassing to tell how many parts changed after working on it and sending it to a mechanic. All to no avail.
There is spark to cylinder, and camshaft is rotating. But, when cranking you can tell no gas is getting into cylinders.
Parts changed: ignition coil, ECM, mass air flow sensor all done by the mechanic. He also repaired some fried wiring going to the injectors. I replaced the fuel pump relay, main fuel pump, fuel filter, in-tank fuel pump and sending unit.
The 25amp fuse under the hood and fuses in cabin area are ok.
Spent way too much and it still doesn't get gas into the cylinders. Would anyone have a clue what might be wrong or what to check next? Thanks






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.