The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

minimum rotor thickness 120-130

I just spent a bit of time trying to find a thread I'd read sometime in the past discussing rotor thickness. Eric mentioned that he has turned them below spec. due to their somewhat over-engineered original thickness. I just couldn't find the thread.

One of the sedans I'm driving has an annoying pulsation on stopping that I'm pretty sure is due to a warped front rotor. I haven't yet measured them, but wanted to either find that thread or get opinions about how much beyond the spec thickness I can turn down to.

I have rarely turned either drums or rotors, and try to avoid it, but if I get the wheel off and get excessive runout I am willing to turn them if, it's possible.

The shop manual lists .500" to.504" as new and .480" as reconditioned, but no minimum, so the question is what's the minimum we're comfortable with? Also would one turn them both to match or just the offending one?

thanks








USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.