The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No start condition 200 1988

posted by  joekidd on  Tue Sep 15 07:34 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:54 CST 2014
[RELATED]

So went on a short trip.Came back after about a half hour and car would crank fine but no start,puttering sound very faint. Checked 25 amp fuse, fuses 4+6, jumpered heard pumps wind up, unplug AMM still no start. Remove oil cap cam turning timing belt ok,.Fuel pump relay I replaced recently so didnt bother to check it.GRRRR. Remove Distributor cap looks ok, replace rotor with old spare in trunk and it fires rite up. Ohm out rotor later and sure enough reads open from center to tip. First time for everything as in my 37 yrs of driving 140s, 164s,240s and 740s I have never had one go bad. And yes it was a bosch rotor.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.