The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Which injector wire to which injector 200 1991

I removed the intake manifold and fuel rail assembly to replace the breather box and some other things in there, and absent mindedly didn't label which injector wire goes to which injector. I realized the mistake when I put it back together. Two of the wires are longer and two are shorter, 1 or 4 and 2 or 3 respectively, but I don't see how to tell which is which. Is there a way to?

I know I could just start the car and see how it runs, however I just put in a brand new VX cam as well. I want to break it in correctly, which means bringing the engine to ~3000RPM and keeping it in that range for a while. If my injector wires are all mixed up that'll be difficult.

So, is there a way to trigger each individual injector to tell which wire is which? Some test mode I'm not aware of? Or even some way to trace the wires and tell? The car is a 91, LH2.4 car.

Thanks for the help with my bone-headed mistake!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.