The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacment alternator brush and regulator 200

posted by  81242DLB21FCA on  Tue Oct 20 18:44 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 22:26 CST 2014
[RELATED]

Remove the battery negative cable.

Once you have removed the old brush/regulator assembly, inspect the commutator for excessive wear. Do this with a mirror, a strong light and rotate the alternator pulley in increments. You will have to loosen the belts.

During installation you will need to retain the new brushes in their holder with a small drill bit. Once the brushes clear the edge of the commutator , the drill bit is removed.

While your at it, check alternator ground wire, bushings and belts. Also the wire to the oil pressure switch for insulation damage or breakage at the connector.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.