The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 just started pulling left 200 1991

1991 240 sedan. wanted to replace front brake lines to calipers, do pads and rotors. found one of the shops I'd been to in college had used rtv behind the pads a some point instead of grease to quiet ceramic squeal. they also rounded the nuts for the hard lines, so I took the car to our shop to do the lines, rotors and pads since they have better tools. got the car back and it had significant pull left when braking hard. it had never done this before. took it back to the shop. they have replaced a caliper, bled several times, swapped lines, yet it still pulls left. next stop is replacing the master cylinder. if anyone has any thoughts on what might be causing the pull left, I'd sure appreciate it. the guys at the shop have always been good to me but none of us are finding the problem, and replacing parts is gettin pricey. thanks, scott






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.