The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Exhaust tail pipe rubber bushings? 120-130

posted by  nglasson221 on  Sun Feb 28 17:35 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Dec 3 19:42 CST 2013
[RELATED]

I am in the process of fitting a new exhaust system. The old system was cobbled together by a muffler shop and the rear tail pipe hanger was a threaded rubber mount bolted to the towbar frame with a strap welded to the tailpipe. I want to revert to the original style rubber bushing mount as per the image. I also want to try and source the rubber bushings locally so I don't need to wait a week for an order to arrive from overseas. I am thinking that I could use readily available O-rings in place of the rubber bushings 665503. My guess would be nitrile O rings that are something like 50mm inside diameter and 64mm outside diameter might be appropriate. Does anyone have part number 667503 on the shelf that they could cast a ruler over and let me know approximate dimensions? I am planning to make the clamp myself as I have elected to run the 44.5mm tube all the way from the manifold to the rear rather than stepping it down behind the muffler. I'll make the clamp from stainless so that heat transfer is not as good so I think it should be OK with any sort of elastomer - nitrile, silicone, viton etc. If anyone is interested, I will gladly upload the dimensioned 3D dxf files I used to the the front and rear pipes CNC mandrel bent. It is for single carb/single down pipe model.







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.